Bare rental · You operate
The Kobelco SK350LC-10 is a 35-ton class tracked excavator available for bare rental in Phoenix, Arizona. ON-SITE rents a 2018 unit from its yard at 21815 N 16th St and delivers it on its own lowboys. It is the largest excavator in the fleet, sized for mass excavation and deep trench work.
A name and a number is all it takes. We call back with the quote, usually same day.
35
Ton size class
2018
Model year
LC
Long carriage
Own
Haul trucks
Excavators are sized by operating weight, not by bucket. A 35-ton machine is the big end of what most Phoenix contractors rent: mass excavation, deep utility trench, basement and podium digs, large footings, tank and vault excavation, and demolition load-out where the volume is too big for a 25-ton machine to keep up with.
The practical difference is cycle time and reach. On a job with real volume, a 35-ton machine feeds trucks faster and digs deeper on the first pass, which is usually cheaper than a smaller machine that works longer hours to move the same dirt.
The trade is transport and footprint. A machine this size wants room to track and swing, and it moves on a lowboy rather than a light trailer. On a tight residential lot the 25-ton or a mini is the better rental, and we will say so.
What we can confirm about the machine in our yard. Dig depth, reach, bucket sizes and transport weight come with the quote.
| Spec | Detail | What it means for your job |
|---|---|---|
| Make and model | Kobelco SK350LC-10 | The model number is both the search term and the sheet the spec is issued against |
| Size class | 35 ton | Operating weight class, which is how excavators are sized and compared |
| Machine type | Tracked excavator | Long carriage, hydraulic, tracked rather than wheeled |
| Model year | 2018 | The year of the machine that will show up on your job |
| Units in fleet | 1 | Owned and parked at the 16th Street yard, not brokered from another yard |
| Rental type | Bare | You supply the operator. Delivery, pick-up and paperwork are ours |
| Buckets and attachments | With quote | Quoted with the machine rather than sourced from a second vendor |
We publish only what we can stand behind. Boom and jib lengths, dimensions, weights and the load chart come with the quote, off the sheet for the actual unit in our yard rather than a number copied from a spec site for a different build of the same model.
10%
Whatever you are paying for an equivalent 35-ton excavator today, we go 10% under it going forward. Not an introductory rate that quietly resets after the first job. Send the invoice, or just describe the work and we will quote it against the market and apply the discount anyway.
There is no rate card on this page on purpose. Every job gets quoted for what it actually is.
Request a quote
Name and number is all we need. We call back with the quote, usually same day.
By submitting you agree we may call and text you about your request, including by automated means. Message and data rates may apply. Reply STOP to opt out. See our privacy policy and terms.
Crews with their own operator who need the machine on site tomorrow, not a counter conversation.
Site and excavation contractors
Mass excavation, cut and fill, pads and large footing work.
Wet utility crews
Deep sewer, storm and water line trench where depth decides the machine size.
Demolition contractors
Teardown, sorting and load-out where volume and cycle time matter.
Grading and earthwork
Bulk dirt moving on commercial and industrial sites.
Tank and vault installers
Excavation and placement work that needs both depth and lift.
Anyone whose machine is down
A replacement out of the yard keeps the crew working instead of standing.
Bare means you run it. It does not mean you are on your own for everything around it.
Delivered and picked up
On our own lowboys and flatbeds, so the haul is not a third company to chase.
COI verified before release
Your certificate is checked on our side before the machine leaves the yard.
Photo walk-around
Condition recorded at both ends, so there is nothing to argue about later.
Day, week or month
Priced for the length you actually need rather than forced into a longer term.
Attachments quoted with it
Buckets, forks and support gear come off the same lot on the same quote.
Cranes from the same yard
If the job also needs a lift, it is one number and one invoice, not two vendors.
Volume and depth decide it. Access decides the rest.
Mini excavator
Volvo EC250DL, 25 ton
Kobelco SK350, 35 ton
Bare rentals go by the day, the week or the month, priced for the length you actually need rather than pushed into a longer term. Delivery and pick-up are quoted from the yard as their own line, so you can see the haul separately from the machine.
Your certificate of insurance is verified before the machine is released, every time. We record a photo walk-around at drop and at pick-up so condition is documented on both ends and damage never turns into an argument at the end of the rental.
If you would rather not supply an operator, tell us. Operated work is the other half of what this yard does, and the machine and the operator can come from the same place on one invoice.
We quote per job rather than publishing a rate card. These are the variables that move the number, so you can check any quote you receive, ours included.
Rental length
Day, week and month rates work differently. Tell us the realistic duration and we will price the right one.
Delivery distance
A machine this size moves on a lowboy, quoted from the north Phoenix yard as its own visible line.
Attachments
Bucket sizes, thumbs, hammers and couplers change what the rental includes.
Site access
How the lowboy gets in and where it can unload affects the delivery, not the machine rate.
Return condition and fuel
Returned fueled and washed is the cheapest way to end a rental. There is no fuel surcharge on our quotes.
Operator, if you want one
The same machine can be quoted operated, which changes it from a rental to a service.
10%
Send us the invoice you pay today for an equivalent 35-ton excavator and we will go 10% under it going forward.
Beat my rateThe yard is at 21815 N 16th St in north Phoenix. The move is quoted from there, so the closer the job sits to the North Valley, the shorter and cheaper the haul.
Most bare rentals go across metro Phoenix, where the haul is short and same-day delivery is often possible. We deliver statewide across Arizona on longer jobs.
Metro cities we run to most
Tri-axle tractors, lowboys to 75 ton, a removable-gooseneck expandable lowboy and a 53 ft flatbed all sit on the same lot as the machine. That means the delivery date is ours to commit to instead of a call we have to make on your behalf, and it is one invoice at the end.
Everything here is owned and parked on 16th Street in north Phoenix. Swipe through, or open any machine for its page.
Cranes and earthmoving off one lot in north Phoenix, delivered on our own trucks. One number, one invoice, whatever the job needs.
