Operator & rigging included · Bare rental also available
The Link-Belt HSP-8050 is a 50-ton rough terrain crane available with a certified operator in Phoenix, Arizona. ON-SITE runs it from its yard at 21815 N 16th St and delivers it on its own lowboys. It is the fleet's mid-size rough terrain: enough crane for most mechanical work, small enough for a tight site.
A name and a number is all it takes. We call back with the quote, usually same day.
50
Ton capacity
1991
Model year
RT
Rough terrain
4:30
AM dispatch
The 50-ton class is where a lot of jobs quietly belong. Contractors reach for a 70 or an 80 because the load "feels heavy", then pay for mobilization and setup on a crane that spends the day working well inside its chart. If the radius is modest, this is often the right and cheaper machine.
It is a rough terrain, so unimproved ground is its home: dirt pads, gravel, sites under construction, and approaches a truck crane would not attempt. The smaller footprint also means it gets into places a larger crane simply cannot fit, which on a congested job is worth more than extra tonnage.
Typical work: mechanical and rooftop equipment, structural members, tanks and pumps, precast on smaller footprints, and utility and industrial maintenance picks. Tell us the weight and the radius and we will confirm whether 50 tons carries it.
What we can confirm about the unit in our yard. Boom length, jib and the load chart come with the quote.
| Spec | Detail | What it means for your job |
|---|---|---|
| Make and model | Link-Belt HSP-8050 | The model number is the search term and the sheet the chart is issued against |
| Rated capacity | 50 ton | Maximum rating at minimum radius. Capacity at your radius comes off the chart |
| Crane type | Rough terrain | Built to travel and set up on unimproved ground rather than paved access |
| Model year | 1991 | The year on the unit in our yard |
| Units in fleet | 1 | Owned and parked at the 16th Street yard, not brokered |
| Rental type | Operated or bare | Operator, rigging and lift plan included on operated jobs |
| Load chart | With quote | Issued for this unit in the configuration your lift needs |
We publish only what we can stand behind. Boom and jib lengths, dimensions, weights and the load chart come with the quote, off the sheet for the actual unit in our yard rather than a number copied from a spec site for a different build of the same model.
10%
Whatever you are paying for an equivalent 50-ton rough terrain crane today, we go 10% under it going forward. Not an introductory rate that quietly resets after the first job. Send the invoice, or just describe the work and we will quote it against the market and apply the discount anyway.
There is no rate card on this page on purpose. Every job gets quoted for what it actually is.
Request a quote
Name and number is all we need. We call back with the quote, usually same day.
By submitting you agree we may call and text you about your request, including by automated means. Message and data rates may apply. Reply STOP to opt out. See our privacy policy and terms.
Usually crews who have sized the pick properly and do not want to pay for crane they will not use.
Mechanical and plumbing contractors
Rooftop units, pumps and equipment sets that do not need a long radius.
Industrial maintenance crews
Motor, gearbox and equipment swaps inside a plant footprint during a window.
Smaller structural jobs
Members and framing on tighter commercial builds.
Utility and municipal crews
Vaults, pumps and equipment on unimproved right of way.
Sign, canopy and shade structures
Sets where placement precision matters more than tonnage.
Anyone told they need a bigger crane
Worth a second opinion. Send us the weight and radius and we will tell you honestly.
You are hiring a lift, not a machine. The pieces that normally get sourced separately arrive as one line of responsibility.
A certified operator
Confirmed before the crane moves. You are not sourcing one per job.
Rigging for the pick
Blocks, spreader bar, slings and crane mats as the lift actually needs.
The lift plan drawn
For your load, your radius and your ground, not a generic load chart.
COI verified before release
Insurance is checked on our side, every job, before iron leaves the yard.
Delivered on our own trucks
Tri-axle tractors, lowboys to 75 ton and a 53 ft flatbed. The haul is ours.
Photo walk-around
Condition recorded at drop and pick-up, so damage never becomes a dispute.
The answer is a chart question, not a confidence question. Here is how the three sizes differ in practice.
Link-Belt 50 ton
Grove RT870, 70 ton
Grove RT880E, 80 ton
Operated crane work bills against an hourly minimum, portal to portal. The clock runs from our yard and back rather than only while the crane sits on your pad, which is standard for operated service and is the number people forget to compare when they shop a rate.
A rigger or signal person is added per man when the pick calls for one. There is no fuel surcharge and no counterweight fee. Larger jobs are quoted as clean separate lines so mobilization, setup and crane time are each visible instead of rolled into one figure you cannot check.
Quoted per job rather than off a rate card. These are the variables that move the number.
Radius before weight
A short radius is why this class can do work people expect to need a bigger crane for.
Time on the clock
Operated work bills portal to portal against an hourly minimum, so travel from the yard counts.
Mobilization distance
The crane rides to site on our lowboy, quoted from the north Phoenix yard as a visible line.
Ground and matting
Outrigger bearing and pads change setup time. Crane mats are available off the same lot.
Rigging and crew
A rigger or signal person is added per man when the lift plan calls for it.
Site access
Congested approaches, overhead lines and gate width all affect how long setup takes.
10%
Send us the invoice you pay today for an equivalent 50-ton crane and we will go 10% under it going forward.
Beat my rateThe yard is at 21815 N 16th St in north Phoenix. The move is quoted from there, so the closer the job sits to the North Valley, the shorter and cheaper the haul.
Metro Phoenix is where this crane does most of its work, and same day is often possible. We run it statewide across Arizona for larger jobs.
Metro cities we run to most
If the crane you were counting on goes down mid-pour, mid-set or mid-schedule, we run a replacement out of whatever is available in the yard rather than telling you to move the date. Dispatch starts at 4:30am, six days a week, and emergency work goes to the front of the queue.
Everything here is owned and parked on 16th Street in north Phoenix. Swipe through, or open any machine for its page.
Cranes and earthmoving off one lot in north Phoenix, delivered on our own trucks. One number, one invoice, whatever the job needs.
80TON
Operator & rigging
Rough Terrain Crane
Grove RT880E
Request a quote →
70TON 2 in fleet
Operator & rigging
Rough Terrain Crane
Grove RT870
Request a quote →
120TON
Operator & rigging
All-Terrain Crane
Grove GMK5120B
Request a quote →
100TON 2 in fleet
Operator & rigging
Crawler Crane
P&H Lattice Crawler
Request a quote →
